Products
-
This made-in-Italy system includes a pair of cationic and anionic nuclear grade cartridges, to produce high quality demineralized water for autoclaves. AquaMed provides a high-quality water feed to your steam sterilizer, ensuring only the highest quality steam comes into contact with your instruments, prolonging both instrument life and condition, whilst also protecting the internal components of your sterilizer. AquaMed is pretty compact and easy to fit. It’s possible to place it everywhere, even 5 metres far from the autoclave and it does not require any electrical connection. It works by the incoming water pressure. AquaMed must be wall-mounted. 1x set of cartridges included.
Product Details
Suitable for
1x sterilizerExternal dimensions
330 x 280 x 140 mm (H x W x D)Weight
3 kgInlet water quality
› 1000 μS/cmFilter lifetime
Up to 150 L of demineralized waterMin./max. supply pressure
2 / 5 bar -
Biological indicators are a meant for the routine monitoring of the effectiveness of the sterilization. Each biological indicator contains a predetermined population of Geobacillus Stearothermophilus spores, a type of bacterial spore which is safe to humans and able to resist high temperatures and that an efficient steam sterilization kills. It is designed to be sealed after processing, reducing the risk of contamination (and consequent false positives) and evaporation of growth medium.
Product Details
Pack quantity
10 vials for 5 testsIn compliance with
ISO 11138-1 -
The Bowie & Dick test verifies the effective steam penetration in porous loads. The test emits a physical (colour) change when carried out correctly. Therefore, not only verifying that the correct temperature was reached in the load for the correct amount of time, but that these parameters were reached in addition to penetrating the load.
Product Details
Pack quantity
1 for 1 testIn compliance with
ISO 11140-1, Type 2 -
The Cross-Checks L indicator strips are designed for use in steam sterilizers operating at 121 °C, 132 °C and 134 °C. When used as directed, the Cross-Checks L indicator strips give visible indication that sterilizing conditions were met.
Product Details
Pack quantity
250 for 250 testsIn compliance with
ISO 11140-1, Type 4 -
This made-in-Italy water quality sensor measures hardness of the water to be used for your autoclave. A perfect choice to combine with our Perfect Water.
Features:
– TDS meter in parts per million (ppm)– Conductivity meter in μS/cm– Temperature meter in °C and °FProduct Details
Battery voltage
3 VTotal Dissolved Solids (TDS)
0-4999 ppmMin./max. water temperature
0 / 99 °CElectrical conductivity
0-9999 μS -
The Helix test verifies the steam penetration in hollow instruments and air removal capability of a vacuum sterilizer. It is used to provide assurance that air has been effectively removed from the chamber and steam has effectively penetrated even the hardest to reach areas of a hollow load, such as long-lumened, narrow instruments.
Product Details
Pack quantity
250 indicators for 250 testsIn compliance with
ISO 11140-1, Type 2-6
EN 867-5 -
DOOR LOCKING:
Motor operated door locking guarantees total safety, greater ease of handling and reliable self-regulation of the hatch.
BUILT-IN PRINTER:
A standard accessory that during the sterilization process, an automatic print-out records the entire procedure, thereby providing a permanent record of every sterilization cycle. The paper printout can then be kept and attached to your files for a complete and accurate record.
USB PORT:
Automatic digital cycle recoding on USB stick (optional).
FRIENDLY INTERFACE:
A multilingual software with just four buttons for simpler navigation to all sterilization options. The LCD display shows current information about your sterilization cycles and alerts on errors or service needs.
CHAMBER:
6 litres made of thick one-piece moulded aluminium.
WATER QUALITY SENSOR:
Our sterilizers are additionally protected by the inclusion of a water quality sensor, as standard. The quality of the water is therefore constantly monitored. The display informs the user whether water used for sterilization is good.
Product Details
Available in class
B/SChamber capacity
6 LWeight
42.5 Kg
(machine empty with basket and trays)External dimensions
345 x 450 x 590 mm (H x W x D)Power consumption
2500 W / 1500 W (B/S)
Optional
Internal USB data loggerIn compliance with
MDD 93/42/CE -
The QuickClean unit cleans thoroughly and consistently throughout the entire bath using Frequency-Leap technology. This advanced software helps ensure all of your instruments are fully cleaned the first time, every time, no matter where they are placed in the basket. Cycle has customized runtime from 1 to 99 min while parameters and results are saved with the integrated memory card port. Variable power settings allow the cycle parameters to be optimised for your application and load type and a fluid level sensor ensures the right water levels are maintained during the cycle, so you don’t have to worry. There’s a range of sizes and flexible basket options to suit your application and throughput needs, eliminating bottlenecks and maximising flow through your instrument processing cycle. Lid and full-size safety basket included.
Product Details
Capacity
4.5 LExternal dimensions
265 x 345 x 260 mm (H x W x D)Tank size
150 x 300 x 150 mm (H x W x D)Weight
6 kgPower supply
230 V
50-60 HzPower consumption
100 WIn compliance with
2014/35/EU
2014/30/EU -
The QuickClean unit cleans thoroughly and consistently throughout the entire bath using Frequency-Leap technology. This advanced software helps ensure all of your instruments are fully cleaned the first time, every time, no matter where they are placed in the basket. Cycle has customized runtime from 1 to 99 min while parameters and results are saved with the integrated memory card port. Variable power settings allow the cycle parameters to be optimised for your application and load type and a fluid level sensor ensures the right water levels are maintained during the cycle, so you don’t have to worry. There’s a range of sizes and flexible basket options to suit your application and throughput needs, eliminating bottlenecks and maximising flow through your instrument processing cycle. Lid and full-size safety basket included.
Product Details
Capacity
12.5 LExternal dimensions
265 x 375 x 420 mm (H x W x D)Tank size
150 x 330 x 300mm (H x W x D)Weight
8.5 kgPower supply
230 V
50-60 HzPower consumption
200 WIn compliance with
2014/35/EU
2014/30/EU -
The QuickClean unit cleans thoroughly and consistently throughout the entire bath using Frequency-Leap technology. This advanced software helps ensure all of your instruments are fully cleaned the first time, every time, no matter where they are placed in the basket. Cycle has customized runtime from 1 to 99 min while parameters and results are saved with the integrated memory card port. Variable power settings allow the cycle parameters to be optimised for your application and load type and a fluid level sensor ensures the right water levels are maintained during the cycle, so you don’t have to worry. There’s a range of sizes and flexible basket options to suit your application and throughput needs, eliminating bottlenecks and maximising flow through your instrument processing cycle. Lid and full-size safety basket included.
Product Details
Capacity
25 LExternal dimensions
365 x 550 x 420 mm (H x W x D)Tank size
200 x 505 x 300 mm (H x W x D)Weight
13.5 kgPower supply
230 V
50-60 HzPower consumption
400 WIn compliance with
2014/35/EU
2014/30/EU -
Proper sterilisation is critical to your ability to give excellent care. Yet, heat sealing your instruments into bags for steam sterilisation can bog down the process and cause costly, sometimes dangerous, delays. The Midmark QuickSeal machine is a smarter option, offering high quality material, more reliable sealing, and both light and sound status indicators to keep your staff alerted. During a busy day, staff members can easily forget the bag in the sealing machine, risking heat related damage to equipment or even injury. To avoid softening or burns, the QuickSeal machine automatically cuts electricity from the resistance, shutting off the heat. Paper roll holder can be also wall-mounted.
Product Details
Sealing dimensions
12 x 300 mmExternal dimensions
H 440 x 400 x 370 mm (H x W x D)Weight
7.5 kgPower supply
230 V or 110 V
50-60 HzPower consumption
100 WIn compliance with
2014/35/EU
2014/30/EU -
The made-in-Italy Osmo3 is a reverse osmosis system which consists of a carbon pre-filter, followed by a reverse osmotic membrane resulting in high quality, purified water ready for use in your sterilizer. It’s possible to place it everywhere, even 5 metres far from the autoclave and it does not require any electrical connection. It works by the incoming water pressure. Osmo3 may be wall-mounted or placed on the top of your autoclave. 1x set of cartridges included.
Product Details
Suitable for
1x sterilizerExternal dimensions
190 x 360 x 170 mm (H x W x D)Weight
2 kgInlet water quality
› 350 μS/cmFilter lifetime
Up to to 600 L of demineralized waterMin./max. supply pressure
2 / 8 bar